-
I'd want to avoid telling everyone+their dog what's the temperature in my house 😛
PVVX, the author of the most well-known alternative firmware for the Xiaomi LYWSD03MMC (and most other ATC based …
-
Hello,
first: thank you again for this great openmqtt!
I am using openmqtt with two gateways. Both were working finde
Suddenly one the gateways can not connect to my Mosquitto MQTT Broker anymo…
-
Not sure why, but same version runs without issues on my VM host of HomeAssistant, but when setting it up pn a RPi3b+ for my garage, the AddOn fails, please advice.
Log from Supervisor:
23-08-12 2…
-
Bonjour
J'ai testé TheengsGateway sous HomeAssistant en Addons
malgré une recherche, je ne trouve pas de réponses
https://github.com/theengs/decoder/issues?q=mi+band
Certaines informations rem…
-
Hi
After Upgrading to 1.7 I don't get temperature and humidity anymore from my 433 MHz LaCrosse-TX141W weather sensor.
Only wind speed and battery are reported.
Here is the message received v…
-
Hi, just getting into this with the hope of getting my ecowitt temperature / humidity sensors recognized.
I have this working with the regular rtl_433 code and an SDR, albeit with a small mod to `f…
-
Please consider porting ESPurna to the new Sonoff Zigbee Bridge (Sonoff ZBBridge)
- https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched Sonoff ZBBridge as an inexpensive Sonoff Z…
Hedda updated
2 years ago
-
Recently I met with this problem (never seen before). Probably it is the reason for the device stops and BLE devices are gon even if they are presented.
I found an open issue about this topic:
htt…
-
Hi, I am trying to use a LilyGo v2.1 with the rtl_433 to decode signals from my Cavius Smoke Detectors.
I know it isn't a documented configuration, and I have cobbled my configuration together from…
-
### The problem
Telldus Live is finally back, but it does not work as it did before.
I am missing 3 devices "Lekestue", "Terrasseplante" and "Vindfang". Others got problems getting all their devic…
large updated
2 weeks ago