-
V 3.3.0.1508
When data are extracted using a batch calculation, there is a slight but noticeable difference between that data and the data shown in the calculation tables tab. They should be exactly …
-
[15] RW. Lin, CH. Chen, YH. Wang, ML. Ho, SH. Hung, IS. Chen, GJ. Wang, (-)-Epigallocatechin gallate inhibition of osteoclastic differentiation via NF-kappaB, Biochem Biophys Res Commun 379(4) (2009) …
-
Two particles test with `nodal` PSATD and no periodic single box (`psatd.periodic_single_box_fft = 0`) demonstrates slight asymmetry. The input script and plots of `Ez` field and its normalized diffe…
-
In the radial geometry the beam travels through the Couette cell, scattering from both left-to-right and right-to-left flow, so the particle needs to be modeled by adding forward and reverse scatterin…
-
This looks cool, a GPU based powder toy would make it run so much faster.
-
Hi,
The `emClarity reconstruct` program holds the entire dataset (+ temporaries?), on RAM, which ends up requiring too much RAM. For the EMPIAR-10304 dataset, containing about 10000 particles (190x…
-
In GitLab by @fkjogu on Nov 25, 2016, 15:49
The histogram algorithm simply counts, how many particles are in one grid cell and assign them to the cell center. To smoothen the discrete nature a bit, a…
-
Hi all!
It could be convenient to have the following particle diagnostics:
* chi
* fields interpolated at the particles' positions
* ` .particle_fields.(x,y,z,ux,uy,uz)` and such also depen…
-
This issue was generated during a simulation by @finnolec on taurus/ZIH/TU Dresden.
If you take the png output, it appears that there are regions with lower than expected density.
![grafik](htt…
-
I am using `BTIS3` scheme to study the laser propagation in e-p plasmas. I always preferred in past using `Probe` because of the data size. However, I had to check the output of `Field` diagnostic and…