-
cause i must use my wifi module as p2p and sta the same time in buildroot linux,so i complie my driver to support both,and after insmod the ko,i can see both p2p0 and wlan0,but when my phone connect…
-
I am interested in receiving APRS data using RadioLib, however, I am struggling to figure out how to do so. The APRSClient only provides methods for sending packets, not receiving them.
I am using …
-
_Initially discussed [here](https://groups.google.com/g/rtl_433/c/8uVm_9eevng/m/QjBNtIKcAQAJ)._
### Use case:
Listening for radio transmission from smoke detectors and other alarms, it would benef…
-
This has never been resolved.
RB35S has too many telemetry items built in.
Once you add additional such as GPS, Pitot, etc, things get way too slow on refresh.
We start getting random "sensor lost"…
-
Hi. please let me know it it possible to write name of the channel with Portable Radio CPS?
-
Hi there,
I'd like to leave a suggestion for future development of the code:
I was wondering how much effort it is to extend the MCMC inference to work with multiple frequencies. With the advance of…
-
I did some rev engineering on the firmware 5RH_NRF_Fangti_V0.14_231124.BF to figure out how
to unlock all channels.
The external flash location 0xF255 contains a value that sets the limits, with '3'…
-
It is currently unclear how well the DFS stack currently used in OpenWrt and Linux in general performs, especially with different radio drivers, that each have to reimplement the pulse pattern detecti…
-
Hi there,
I'm trying to compile the firmware for the ESP32-C3 and a SX1278 (my goal is to make the cheapest RNode possible)
![image](https://github.com/user-attachments/assets/64e8ae6c-f71f-47ae-845…
-
Is it possible to use rpitx for transmitting recorded AIS wav file?
> An AIS transceiver normally works in an autonomous and continuous mode, regardless of whether it is operating in the open seas …