-
When using http://github.com/benhylau/mesh-router-builder to build the mesh-workshop profile the RPI 3B+ will no longer boots and complains about EOF on the ram disk. However using the same builder wi…
-
**Is this the right place for my bug report?**
This repository contains the GPU firmware used on the Raspberry Pi. This software is the closed source part of the Raspberry Pi system, it includes boot…
-
At some public chargers (particularly ones by Alfen), the car can communicate with the charging station to give details about it's SOC, this is shown on the charger display. Looking around the interne…
-
Sometimes, the printing get stuck with the message "Rendering completed". Sometimes it can be fixed by turning the printer off and on. Sometimes, it can be fixed by disabling the printer and enabling …
-
**Describe the bug**
WiFi client stops working and does not recover (Cypress firmware crashes). This happens to my RPi4 almost every day and I must reboot to recover it. After reboot, it always wor…
-
#### What were you doing?
It happened a lot of times but lastly I have been printing a flover pot overnight. After 3 hours of print it started layer shifting every hour or so. When I print the exact …
-
Candle Manager installed correctly.
Candle Receiver installed correctly.
Up to there everything works OK.
Created a "temperature and more" device.
When installing the new device, the process sto…
-
While using BetterCap to do frame injection for KARMA Attacks and otherwise general packet injection, The bcm43455c0 stops responding to all commands and just dies..
Please provide me with some det…
-
On an RPi4
I am using Raspbian
I am using bootloader:
Mar 4 2020 14:24:08
version a445ea4fa94708c89875dbbb7a0b19e72987cbb2 (release)
timestamp 1583331848
Linux retropie 4.19.66-v7l+ #12…
-
After the recent kernel update to 4.19 via apt-get update, my audio becomes distorted.
Playback of MP3 via VLC has brief dropouts and some clicking can intermittently be heard.
Remote desktop to a W…