-
Hi,
our exporter configuration looks like that:
```
750-8216:
USBSerialPortService: …
-
Where and how exactly do I properly set the uri path for RS-485?
I've tried many variations, and there's currently one that I've commented out. Is this the right line to be putting in the URI.Pa…
-
Provide the ability to use a different interface to serial (recommend a network interface such as a TCP socket) so that:
- Installations where the RS-485 interface is remote to the TWCManager machi…
-
Memory consumption increases indefinitely when teleinfo binding is in use.
This seems to be more critical on OH3 (one or two days before `out of memory` error versus one or two weeks on OH2.5).
Th…
-
## What happened
zigbee2mqtt is unable to communicate with slaesh's CC2652RB stick via ser2net. After starting, the following error message is raised:
```
Zigbee2MQTT:error 2020-09-27 13:17:50: E…
-
Would it be possible to add support for the older Epson projectors that have a serial connection instead of network (e.g. EH-TW3200) ?
The protocol is the same otherwise (also ESC/VP21).
-
Hello,
I am using the smartmeter binding version 2.5.0.
## Current Behavior
Sometimes my IR Reader catch up some wrong characters which lets the smartmeter parser crash. After this, this binding …
-
Hi,
I have been working to get ser2net working with the NetSerial PC client (https://pcmicro.com/NetSerial/). I am currently using v3.5.2 of ser2net, but I have seen similar problems with v4.1.8.
…
-
* Operating system: Windows 10 Pro 64bit for rfc2217 server
* Python version: 2.7.11
* ESP hardware in use: Recent version of [Bangood Geekcreit ESP32](https://www.banggood.com/ESP32-Development-Boa…
ghost updated
4 years ago
-
Hi,
checking the man page for man/gensio_set_sync.3 gives a warning:
`LC_ALL=en_US.UTF-8 MANROFFSEQ='' MANWIDTH=80 man --warnings -E UTF-8 -l -Tutf8 -Z man/gensio_set_sync.3 >/dev/null
`troff: :5…