-
-
_Note: Just speculation, but I wouldn't be surprised if the LEDs on this model worked the same as #218, with the only difference here being that it has a programmable LCD._ I would like `liquidctl` t…
-
### The problem
Warning messages in the log file.
### Which version of ESPHome has the issue?
all
### What type of installation are you using?
Docker
### Which version of Home Assistant has the…
-
### Board
ESP32-S2-DevKitM-1U-N4R2
### Device Description
Espressif ESP32-S2-DevKitM-1U-N4R2 (https://www.amazon.com/dp/B0B97H9D4F?psc=1&ref=ppx_yo2ov_dt_b_product_details) on breadboard.
### Hard…
-
Recently I installed a RGB CCT ledstrip over the full length of my living room. The dream is to use an Amazon echo dot with a harmony hub so I can start a movie activity by voice and the tv, receiver,…
-
First off thanks for writing this code, I cant wait to get it all working and do some proper tinkering!
It's been a bit of a journey but I've managed to get circuit python building the firmware and…
-
More of a request: Is there a hardware schematic documented to what pins are being used and what LED location to what pin?. To determine if can stack another shield/hat. I wanted to see if i could sta…
-
I was looking into the code for possible points of concern. To me this looks like a possible deadlock which results in a stall of the high priority thread. The front ground thread is capable of acquir…
-
NAMF 2020-26 (2020-03-17) mentions: _added I2C RGB LED Bar support_.
Searching nettigo.eu for the term "LED bar" results in 8 product. None of the results seem to be a NAM compatible module.
[N…
-
Not an issue, but I suggest an addition to the documentation regarding a tool that allows the ROG ALLY to control their RGB LED.
[https://github.com/honjow/HueSync](url)
I have tried multiple t…