-
Hi,
we have been running experiments with the RS41 board on solar and direct battery power. Connected directly to the board and skipping the power button which is out of reach when the unit is flying…
zanco updated
3 years ago
-
Getting incorrect readings, the radiosonde is an RS41. Not sure what is going on.
`Clb=-15.2m/s t=7.9C h=80.4% p=-1.0hPa 403.001 MHz Type=RS41-SG Radiosonde auto_rx v1.4.0`
-1.0hPa reading on a…
-
Hi,
I´m using your decoder with radiosonde_auto_rx and in the log of the sounding the value of the pressure sensor is not present.
It´s not implemented yet? Because the model of the sonde -SGP (wit…
-
Currently we use a JSON input format to pass data from the various RS decoders into auto_rx. There are lots of fields, and some are handled differently depending on the sonde type.
The fields, and h…
-
When generating a `PositionPacket` with:
`compressed = False,
source="RS41",
destination="BASE",
lat=50.99263,
lon=4.79026,
ambiguity=0,
symbol_table="/",
symbol_id="O",
path=''WIDE2-2"
`
…
-
The RS92 PTU data is described here:
https://brmlab.cz/project/weathersonde/telemetry_decoding
Frequencies of capacitive sensors can be measured as periods 1/freq. The RS92 PTU values can be appro…
-
I would like to try and write the output that you get in the Data screen on the web interface to SDcard for when I'm outside with only the tracker.
I want to implement the SD_MMC library but it's a…
-
Hi team,
Apologies in advance if this isn't the correct way to raise this; I can't be certain it's not user error however I've tried to validate as much as I can, but there's not a lot of informati…
-
Dears,
**RS92**: The temperature is shifted by one decimal place and the air pressure and humidity values are missing.
![grafik](https://user-images.githubusercontent.com/29872463/69913676-1370b18…
-
Hi,
What is the best Gian level when i use a lna 403mhz from Uptronics. Because on GQRX i see a high level on noise ...
Tx
Chris (ONCR16)