-
So I've got a port mirror on my switch connected an ubuntu machine that is running the GoFlow docker container, its unclear to me how I might be able to have the packets coming in on that interface se…
-
#### Description
After a switch reboot, the interface appears as UP in the `show interface status` output but is displayed as DOWN in the kernel (`ip link show Ethernet0`). To resolve this issue, i…
-
#### Description
show platform commands either show no info or error about python. This was fixed and working since https://github.com/Azure/sonic-buildimage/pull/10215 was merged but it now seems …
-
**Description**
There should be a verification for `config portchannel member add` command in case of adding a port that **has already been a member of another portchannel interface**.
Currently, …
-
my sflow data decoded fail, I found when execute function getSampleInfo, sflow/decoder.go:194, the sfType is 3, not const DataFlowSample and DataCounterSample , it seem sfType always 3, and I dont kno…
-
We used hsflowd in SONiC.
- The agent is set to Loopback0
- the Loopback0 has both IPv4 and IPv6 address
**Issue:**
The IPv4 address priority should be higher than IPv6 per hsflowd design "EnumI…
-
orchagent crash when 20k BGP route advertisement pushd local device.
Steps to reproduce the issue:
1. Establish IPv4 BGP neighbor with auxiliary testing device
2. 20K route is printed on the auxi…
-
#### Description
'ZMQbg!IO!0.1723726688.21.core.gz' core files getting genrated while running SONIC PTF we cross referenced the timing of crash to telemetry test cases.
#### Steps t…
-
#### Description
After rebooting, sometimes(~50%) there is an error log "Failed to start eventd.service - EVENTD container" in syslog. However, I still see the container eventd is up. After thi…
-
I've installed SONiC into Accton AS5812-54T, but I am unable to see any interfaces in the CLI. I also found that syncd seemed to be hung up due to error. I expect that I can see the status of every po…