-
Hi,
After doing all the checks.
If you're sure this issue is a defect in the code and checked the steps above
please fill in the following fields to provide enough troubleshooting information.
…
-
I've been trying and trying to create a CMakeLists.txt file that will allow a current version of ESP-IDF (v5.0) to compile this project, but have had no luck. However, I really have very little idea …
-
Would you be so kind as to upload a .hex file so that I can test if my board works? the probe starts at 38 seconds and begins transmissions. but i am not getting the readings from the bmp280 sensor.…
ghost updated
2 years ago
-
Hello,
While building RS41ng I run in `region from" overflowed by 4 bytes` error message while linking.
Platform is Ubuntu 20.04.2 LTS.
Any hint how to solve?
```
➜ build git:(master) cmak…
-
### CircuitPython version
```python
1. Adafruit CircuitPython 7.3.0-beta.1 on 2022-04-07; Adafruit QT Py RP2040 with rp2040
2. Adafruit CircuitPython 7.3.0-beta.0 on 2022-04-01; ESP32-S3-DevKitC-1-N…
-
Hi,
I have tried the latest binary on debian 8, but it will not boot, after the grub screen, it freeze at loading ramdisk ...
I will try running the script to generate my on patch ...
-
Please take a look at lines 412 and 416 of Adafruit_SI5351.cpp
`ASSERT(m_si5351Config.plla_configured = true, ERROR_INVALIDPARAMETER);`
These are testing the _assignment_, not the _value_, and thus …
-
i cant install nvidia-dkms 525.89.02
log say
`==> dkms install --no-depmod nvidia/525.89.02 -k 6.2.6-zen1-1-zen
Error! Bad return status for module build on kernel: 6.2.6-zen1-1-zen (x86_64)
Co…
-
The uSDX ham transceiver group is looking at porting the code currently running on the ATmega328 to either the atmega4096 or the AVR128DB-32 (or 48). It's a case of feature creep vs available flash, …
-
Hello,
I admit I'm coccinelle newbie.
While I was trying to use coccinelle to extract functions calls, I stepped into a weird situation where spatch hangs.
My intent here is to extract function cal…