-
This is not an issue, just my thought after I was tried building bitstream of rocket core for FPGA vc707 and building sd boot image for the vc707.
The env variable RISCV is used for two different t…
-
Hi, I am building SiFive Freedom-u-sdk on Ubuntu 20.04.3, running on parallels desktop on ARM64 architecture (Apple M1 Pro). Since it is ARM architecture, I could not install Ubuntu desktop directly; …
-
I execute kas build freedom-u-sdk/scripts/kas/qemuriscv64-cli.yml
then there is one tast failured. the log is as following:
ERROR: Task (/home/wdh/riscv-sifive/build/../meta-tensorflow-lite/recipes…
-
I need to remove the u500 device tree file from the free project and load it into the SD card by bbl. And already done so. My solution is this, write the device tree file and bbl to the SD card at the…
-
My host has liblzma installed and as such the recipe for gdb in riscv-sifive/openembedded-core/meta/recipes-devtools/gdb tries to compile in lzma support even if it's not yet built for the target. Is…
-
I am trying to build linux to run on spike( it is reguired for project i am working), it is not building properly.
This is the part of build process where error came.
>>> libtirpc 1.0.1 Updating…
-
I added IPtables to the current kernel, built and loaded it into the Unleashed. When I try to load the module `sudo modprobe iptables` or run `sudo iptables -L`, I get this dump:
```
[ 75.270000…
-
While I can appreciate why RISC-V V 1.0 can't select among mask registers per instruction, I am troubled because I can't understand the rationale behind the dual-use v0 scheme chosen in lieu of a dedi…
-
* 基于以前清华童鞋们在fu740开发板适配zCore的工作，运行起来正常进入sh；
* 合并以前代码到zCore master最新分支，大量冲突。修复了：`引导`、`多核启动`、`内存`等系列的问题，在master中正常运行起来；
* 合并后修改以pass测试CI；
* fu740板子的`PCIE`地址在一个超过32位的高地址，对这个问题调整地址空间，并顺利初始化fu740板子…
-
Error while executing `kas build freedom-u-sdk/scripts/kas/qemuriscv64-cli.yml`.
`fatal: unable to access 'https://github.com/abseil/abseil-cpp/': Failed to connect to github.com port 443: Connection…
JuFly updated
2 years ago