-
The MMU produces quite a hissing sound while idle.
The stepper drivers should enter a reduced power mode while not moving.
-
Hi, I am trying to use the PicoCNC board with the RP2040 for a DIY plasma cutter and am trying to get THC working. The analog input will be the ADC on GPIO28, moving the probe pin to 24. I also ordere…
-
Hello all,
Although I got some StallGuard values output, the results are hard to interpret.
I have the TMC2209 connected to an Arduino Mega via UART.
I have written a script where the motor acce…
-
As described in other issues, I am having trouble getting the BTT Microprobe to work with the Pico. I have everything wired up correctly using the servos and probe ports on the board, have removed the…
-
Good afternoon, faced with problem drivers tmc2208 bt fysetc
https://aliexpress.ru/item/32848553467.html?spm=a2g39.orderlist.0.0.4b8b4aa68oAwrM&_ga=2.102432385.1279670221.1630433926-2024624615.1628…
-
Just updated from one Allot's previous versions.
Steppers are noisy and it's printing at about half speed with this build. I'm thinking steppers are different.
My Sapphire Pro uses an MKS Robi…
-
Hi,
I've purchased the TMC2226 drivers to upgrade my BIQU B1 and would like to know if I just need to replace the original stepper drivers or do I need to change the firmware to work with the new d…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
Hello,
I would like Mar…
-
Hello everybody,I have a problem with my delta printer and I would be very grateful if you help me
to solve it.
I'm using Arduino due + RADDS with Repetier firmware.
The problem started when the …
mj996 updated
4 years ago
-
> I have no idea if its working I have added everything I think.
#####################################################################
# A/B Steppers https://github.com/bigtreetech/Manta-M5P/blob/…