-
When using Marlin 2.0.4.4 as the source, compiling fails with the provided configuration files here in the repository.
Error message in vs code:
In file included from Marlin/src/HAL/HAL_STM32F1/..…
-
There is a new (?) cheap board family available via aliexpress, which could be a nice candidate for porting.
It is sold under the name "WeAct STM32F405RGT6 STM32F412RET6 STM32F446RET6 STM32F405 STM…
-
Hello,
Same problem here, I managed to compile a firmware with platformio since marlin bugfix 2.0.
I put firmware.bin on my SD card and she installed marlin.
Now I just installed a bltouch so…
-
I tried to explore the LCD/TFT interface after checking the SD card, Serial, GPIO, EEPROM, SPI communication. Everything is working fine except LCD/TFT interface. I tried to use the LTDC interface f…
-
STM32F7 series:
- ETH_DMATXNDESCWBF_OWN define is missing
- ETH_DMATXDESC_OWN define for DMA Tx descriptor status register
If "Transmitter is busy" checking is necessary in ETH_MAC_STM32 driver …
-
Hi Kris,
I am seeing a strange behaviour from the MPU9250 FIFO. At some point I am getting FIFO data corrupted!
When I look at the data registers for accelerometer (accel), if I print them along …
-
on some/many F7 units incremental DFU flash via command line stm32 causes bricking
only full erase and flashing of same helps
-
I tried to make a setting in Marlin 2.0 bugfix so that I can describe the epromm and then I loaded the Firmware.bin. Because I could not set a command M500 Now I can no longer load firmware via SD car…
-
**PROBLEM**
Program execution takes more time in zephyr 3.6.0 on stm32-h743 controller
**Elaboration:**
Same program execution takes more time in zephyr 3.6.0 when compared with zephyr 3.2.0 on s…
-
Hello,
with commit f46ec37262bc4fd82b6c91d24198cc3b4a499fe3 some ‘register’- qualifier are removed from the code.
With this changes on NXP iMX-RT Controllers the Code execution enters an endles…