-
- If you refuse GPS permission, if you have Android older than version 7, or if your Android device does not have a GPS chip, an internal exception will cause the whole rdzwx-plugin to fail (i.e. not …
-
Hi,
i am using a TTGO T8 V1.8 devboard which has an onboard card reader. i installed the newest micropyhton Version on the board.
The Board has on the bottom side following description:
SD
D…
-
IMPORTANT
Issues that don't use this template will be ignored and closed.
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://docs.lvgl.…
-
Hi, I am just wondering if I did something wrong.
I clone the 1.13 branch
```
git clone -b 1.13 --recursive https://github.com/OPHoperHPO/lilygo-ttgo-twatch-2020-micropython
```
and when I check …
-
Hello,
Many thanks for this project, I had some loadcell available and tried to source a Heltec Wifi Kit V2 but couldn't find any. So I bought a V3 thinking it will be a simple GPIO swap, well lon…
-
In utilities.h, the RST pin for the T-Watch S3 is set to -1:
#define BOARD_TFT_RST (-1)
https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library/blob/t-watch-s3/src/utilities.h#L8…
-
My new board is exactly as shown here https://github.com/LilyGO/TTGO-LoRa32-V2.1
How to access GPIO0 at this board?
I've got problmes uploading my code using Platformio because of permanent time…
-
Hello @uho
I got a TTGO VGA32 board, and I've installed ESP32Forth Station on it. It works so far, but it's an old version, so I thought of updating to latest ueforth.
I've compared the original …
-
**Describe the bug**
TTGO Lora32 V2.1 Does not boot image after upload via Upload File System image in PlatformIO.
Build ok in PlatformIO
Upload ok in PlatformIO
Board stays with the meshtastic …
-
[https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Receiver-configuration](url)
I would like to have the value of the frequency-error (shown on the Display) viewable somewhere in the webinterface too. …
DG0MG updated
10 months ago