-
I found I can get two different errors (`UsbToolsError` or `USBError`) in essentially the same place, when a USB disconnect occurs.
Underlying (hardware) problem is MiniUSB connector on FT4232 modu…
-
## Environment
- Development Kit: ESP32-PICO-Kit
- Kit version (for WroverKit/PicoKit/DevKitC): v4
- Module or chip used: ESP32-PICO-D4
- IDF version: v4.2-dev-1988-g636b964c8
- Build Syst…
-
HW info:
- Holtek HT32F1654 (Cortex-M3)
- MXIC 25L4006E 4Mbit SPI Flash
- 3x Macroblock MBI5042GP LED Driver (1 per channel)
Tasks:
- [ ] Add photos
- [ ] Add schematic
- [ ] Write firmware p…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
**Describe the bug**
After upgrading the firmware on a Lenovo T14s 2nd Gen AMD the capacity of the battery is always 0% and stays there even Linux reports that the battery is being loaded. Working wi…
-
- [x] Edge
- [x] Pulse width
- [ ] Pattern
- [ ] CAN
- [ ] Duration
- [ ] FlexRay
- [ ] I2C
- [ ] I2S
- [ ] LIN
- [ ] MIL-STD-1553
- [x] Nth Edge Burst
- [ ] Sequence
- [ ] SP…
-
### Describe the bug
Recently discovered that kernel 6.6.x with some winbond w25q128 (chip id 0xef4018) cause boot loops. Described here:
https://lore.kernel.org/all/CALxbwRo_-9CaJmt7r7ELgu+vOcg…
-
I tried to follow the [Hans de Goede's instructions](https://hansdegoede.dreamwidth.org/28841.html) but the driver cannot reset the hardware:
```
[ 11.336391] intel_vsc intel_vsc: hw_reset faile…
-
## Environment
- Module or chip used: ESP32 rev1 on TTGO
- IDF version: 4.4.2 release
- Build System: Standard VSCode installation (Windows) as per the tutorial
- Power Supply: USB
## Problem…
-
I have been toying with the idea for a few weeks now about unifying some of the communications with 3D printers. And thereby future proofing the 3D printer market.
One of these ideas, is looking a…