-
Display does not appear if you git upgrade before driver install.
### Raspberry Pi OS
bookworm 64bit 2023-10-10
```
pi@raspberrypi:~ $ cat /boot/firmware/issue.txt
Raspberry Pi reference 2…
-
Hi everyone, I have a question/issue with my ADS1115 and I'd like to know if my conclusion is right or not.
I wrote this small code to test the speed of the ADS1115:
```cpp
#include "ADS1X15.h"…
-
Hello,
our project is to make the datalogger for the suface water wave measurement. The datalogger was planned to be based on OLA (https://www.sparkfun.com/products/16832 ) with water level sensor …
-
Hi !
in first thanks for GPIOnext, it's a great software,
i need to use it with an analog joystick, i have been search on internet but nothing,
GPIOnext take only one way on the joystick, not the t…
-
It appears the current overlays do not support Bookworm on the ReTerminal DM.
The raspberry pi foundation recently updated the default Raspberry Pi OS to Debian Bookworm and the install script is no…
-
Using a recently bought Enviro+ -possibly with ADS1115, on Rpi 4 B and
having installed all the required packages. It was working just fine for two days,
Then I'm started getting the error below w…
-
Ran the install script. Could not run examples out of the box, even though that was the next step in the tutorial. I needed to manual install bme280.
Still need to locate ltr559 and ads1015, wherev…
-
```
rauc install http://10.0.0.10/bundles/update.raucb
installing
0% Installing
0% Determining slot states
20% Determining slot states done.
20% Checking bundle
20% Verifying signature
…
-
Hej!
I am using the ads1015 in single ended mode and getting 16 bits when I ask for the value. If it is allegedly a 12 bits ADC shouldn't I get 4096 as the maximum value? Am I missing something?
…
-
https://github.com/j0ono0/pinout
https://github.com/yaqwsx/PcbDraw