-
USB OSC Arduino Device List
Tested on Windows 7 based Ion console
Arduino Uno Genuine Yes
Osepp Uno R3 Plus Does not see USB device
Arduino 101 Genuine No
Arduino Ethernet with Arduino F…
-
It'd absolutely awesome if this library also worked with remote host/url, like in https://github.com/schreibfaul1/ESP32-audioI2S. This would allow playing audio directly from youtube using the audio-o…
-
Currently (1.0.0), the library automatically creates a RS485 object running on the `SERIAL_PORT_HARDWARE` serial port (https://github.com/arduino-libraries/ArduinoRS485/blob/master/src/RS485.cpp#L181)…
-
Supporting addition boards via the QWIIC/Stemma QT connector like the following would be a great addition. This is not an exhaustive list, I'm sure many more exist.
- [SparkFun Pro Micro - RP2040](…
-
Hi Tim,
Branching over from the Instructables page. I don't think there is anything wrong with the way you implemented the PDM software on two cores... I think it is a problem with the way I am assum…
-
### Describe the problem
when I try to start debugger I get request 2 canceled on connection close
does not start debugger.
I can upload the sketch and it runs to output the position. I have not…
-
### Hardware:
Board: ESP32-DevKitM-1 (ESP32-U4WDH)
Core Installation version: 2.0.0-alpha1
IDE name: Arduino IDE
Flash Frequency: 40Mhz
PSRAM enabled: …
-
Hello!
When attempting to upload a sketch to my Watchy I'm receiving an error `A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header`. I was able to upload sketche…
-
Pico W has been released today with included wirless chip. It would be great if tinygo supports it. It uses CYW43439 as wireless chip.
https://www.raspberrypi.com/news/raspberry-pi-pico-w-your-6-io…
-
### The Test Setup:
I have 2 Pico's wired together to test UART communications, I am using UART0, pins GP0 -> GP1, GP1 -> GP0 , GND and VSYS wired together.
I built a Test Harness based on these e…