-
We have run into an issue lately where we wanted to have more than two additional core timer interrupts. Now, I realize we could munge together multiple interrupts and makes sure they execute at integ…
-
I'm trying to get this working with my Switch.
I was able to successfully run the make command and flash the hex files to my Arduino (or at least, I have no indication that it was unsuccessful).
H…
-
This project changes `LOW`, `HIGH`, `INPUT`, `INPUT_PULLUP`, and `OUTPUT` from macros to enums:
https://github.com/arduino/ArduinoCore-API/blob/e1eb8de126786b7701b211332dda3f09aa400f35/api/Common.h#L…
-
Subscribe to this issue and stay notified about new [daily trending repos in C](https://github.com/trending/c?since=daily)!
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
This library will provide the following functionality:
* Allow sleep where the RTC is used to keep time in standby sleep, and adjust millis() time upon wake, when using any timer except RTC as the …
-
Basically, simulate a keyboard when plugged into a computer.
This is really useful if you're using a computer at say, work or school and therefore can't install Keepass XC.
ghost updated
5 months ago
-
Hi Greiman,
I have a FAT32 SDHC card which works fine on ESP32 via SPI with the standard SD library, and also works fine on Windows. (I can read and write files, both on the microcontroller and in …
dejwk updated
8 months ago
-
@arengarajan99 and I had a little discussion about how time should be represented in reactor-c. Lets make that discussion public here and reach a conclusion.
There are 2 options:
1) Keep a singl…
-
The thought occurred to me that we could skip the timestamp if a negative version of the log level were passed to `log()`. What if the user just wants an indented line (with `vendorID`) for multi-line…