-
Good morning,
I managed to change the firmware to OpenBK7231T_UA_1.14.3.bin. It´s up and running.
However, it appears that the IR sending and receiving ressources are not part of the package. I´…
-
**Describe the bug**
When changing colors from one of these apps (Hue Essentials connected via [diyHue](https://github.com/diyhue/diyHue), or Tasmotrol) the RGB colors are set incorrectly.
For examp…
-
I have a smart power plug with a WB2S chipset and a BL0937 power/current/voltage monitor. Libretiny works well to sense button and control LED and Relay, but the BL0937 readings only return zeros. The…
-
Trying to flash a 1.2.1 switch module (one of several variants that all have the same issue).
I get past the AP stage (see below) no problem, but at the point of flashing firmware it seems to get stu…
-
I am trying to flash esphome to my circuit breaker, but cloudcutter failed as below.
Could this be related to the todays changes of @Cossid? I will try earlier version and report back.
```
Usin…
-
Hi! I am using the HA add-on to install a very basic yaml file on a bk7231t. I managed to install the starting yaml after I reinstalled the add-on, but now I can't compile an updated version.
Below …
-
Hi guys, I have a TCP Smart LED strip (RGBW). The chip labelling is WB3S, which I understand means it's a BK7231T.
The Smart Life app tells me the firmware is 1.3.3, however I cannot see any profile…
-
This is the output using a RP4
I have tried on 2 plug switches so far with the same result.
Firmware on the plugs are 1.1.8
ideas?
```
n@raspberrypi:~/tuya-cloudcutter $ sudo ./tuya-cloudcutter…
-
[GoMedia Tuya ZMB9-W-1P.zip](https://github.com/tuya-cloudcutter/tuya-cloudcutter/files/13325060/GoMedia.Tuya.ZMB9-W-1P.zip)
Hi, I have successfully used lighleak to dump the device below:
https:/…
-
The model I have may be a clone of the GR-W-105 valve. It uses a WB3S with Main and MCU modules both 1.1.5. Is there anything I can do to narrow down the reason for failure?
I also have another un…