-
While trying to get an emulation device working with owfs and the ds2482 protocol I was struggling to find out why it this implementation working. The data from the OW bus is never read using the spec…
-
Hello,
Evok keeps showing the following log. I'm running 2.0.1 on Neuron devices.
Is this something I should worry about ? Does it means there's something improperly setup ?
```
Dec 22 12:45…
-
_NOTE: I am [reposting my forum post](https://forum.beagleboard.org/t/l2-cache-flushing-due-to-starfive-7100-architecture/29197) here for greater visibility._
The BeagleV beta boards have the StarF…
-
**Description**
I compiled the kernel with Rust support and tried to boot. However, I am stuck at the emergency shell.
From what I can see in logs, it seems that the modules fail to load. Might be r…
-
- Mycodo Version: 8.25
- Raspberry Pi Version: Pi Zero W
- Raspbian OS Version: Buster Lite
Having been running my set up for a couple of years (with version 6.45) without issue, I am just bui…
-
## Environment
- IDF version (run ``git describe --tags`` to find it):
// v4.2-dev-1206-g741960d5c
- Build System: [Make]
- Compiler version (run ``xtensa-esp32-elf-gcc --version`` to …
-
## Issue description
I installed NixOS on bare metal in a computer of mine this last weekend...and graphics did not work. They just stop updating after a certain point in the boot, however, the OS…
-
Hi, all!
I'm running owfs
```
/usr/lib/owfs/owfs version:
3.1p5
libow version:
3.1p5
```
Since yesterday I'm I got troubles accessing my Dallas 1-wire sensors read from [t…
-
**Describe the problem you have/What new integration you would like**
Support for more Dallas/1-Wire devices. Few more are already supported in HA https://www.home-assistant.io/components/onewi…
-
Hello,
i use DS2482S-100 and DS2482-800 over i2c on a long bus. Is it possible to get and set the values
Pulldown Slew Rate: 1.37V/μs
Write-One Low Time: 11μs
Data Sample Offset/Recovery: 10μs
…