-
Trying to find a way to program right ctrl key only?
I've not found a way yet.
Thanks.
-
Hi, I have a Yamaha FC5 sustain pedal which unfortunately doesn't have a polarity switch on it.
Plugging it into footswitch 1 on my Push 2 which is connected with Bitwig Studio on Linux running thi…
-
```squirrel
impFactory_005
-
I hope new version you will enhance
I think it will save amount of push buttons.
Example button 1 and 2 for bank up, button 2 and 3 for bank down, button 1 and 2 and 3 for tuner :D
Thank you so muc…
-
The following criteria must be met, so the autopilot is considered to work properly:
- [x] Each MIDI file has a place to put a number on it. Default = 1
- [x] If the BeatBuddy is interrupted manual…
-
Dave,
It just occurred to me that this might be a showstopper with the prototype boards that arrive this week. I have moved the MCP23017 for the footswitch off the main board, and on to the new fo…
-
Not an Issue. I plan to built PedalinoMini but i like to have the status led/bypass on my switches. so i know ever if the effect is active or not. Like a normal pedal board.
The top must be have …
-
Hello Pieter!
I have buttons in multiplexer 4067 and leds in shift registers.
When I press a button midi cc with value should be sent and led will light up, when I press the same button again mi…
-
Hey,
what has to be done to setup two PedalinoMinis to communicate over ipMidi.
Same network and activate IN and OUT for ipMidi, is clear. Something else?
Thanks again, cannot thank you enough.
…
-
When I reset the esp32 and cycle the banks I get A8, B10 and C2 as I cycle the boot switch.
I can't work out what process locks them at a particular profile/bank setting. When in web app live I can s…