-
Using custom board with STM32L011F3P3.
IDE is Keil MDK Version 5.38 with ST32CubeMX version 6.9.1.
The STM32L0xx reference manual (Feb 2022) states on page 281, that the TIM21_TRGO trigger is only…
-
I was looking for an example which will guide me to report panics to the host PC over USB. I count not find one, so I wrote mine. I know it's not good as I am not a professional developer. Still like …
-
I installed Arduino IDE 2.3.0, then added 'ESP32 Dev Module' Board, then got makeEspArduino, running it like this:
```$ make -f ~/Arduino/misc/makeEspArduino/makeEspArduino.mk CHIP=esp32 BOARD=esp32 …
z0rti updated
9 months ago
-
I am trying to use ISOAgLib on custom CM4 based board (with CAN, RS232 and external Flash memory) with Linux system.
My isoaglib_project_config.h
`
#ifndef INCLUDED_FROM_ISOAGLIB_CONFIG
#error Do…
-
It would be good to have a guide for driver authors and other users of embedded hal providing best practices for defining and consuming drivers, and detailing the use of generics in both (as this can …
-
I have a question about open-sensor-platform.
I am studying linux driver and HAL following directory but I don't find source
of linux driver and HAL.
https://github.com/sensorplatforms/open-sensor-pl…
-
When switching to wayland I get these errors:
```cmd
warning: unused imports: `ObjectStorage`, `Renderer`, and `Window`
--> src/main.rs:1:36
|
1 | ...e, Renderer, ObjectStorage, /*ObjectSett…
-
System : Raspberry 5, with Kali, Kernels 6.1.64-v8+ to 6.6.45-v8+
When make, getting the following error :
```
CC [M] /home/kali/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o
CC […
-
Bevy version: 0.14.1
Relevant system information: Windows 11 Laptop with Ryzen 7 7840HS CPU, 780M intergrated graphics and 7700S GPU
If you cannot get Bevy to build or run on your machine, pleas…
-
Another fun issue moving over to the B&W G3 is I can't actually select the HAL (or likely subsequent drivers) due to the lack of a floppy controller on the machine.
Selecting other returns "An unex…