-
**Hardware Environment**
- [ ] Raspberry Pi [1/2/3/4]
- [x] ODROID [C2/C4/N2(+)/XU4]
- [ ] ASUS Tinker [S]
- [ ] Generic x86-64 (like Intel NUC)
- [ ] OVA (Open Virtualization Appliance, on…
-
### Describe the issue you are experiencing
Home Assistant OS 12.4 Will not boot on a new ASUS NUC 14
Booting ‘Slot A (OK=0 TRY+0)
System will freeze after that
### What operating system image …
-
I'm getting this error on HAOS 12.3:
```
The command '/bin/bash -o pipefail -c apk add --no-cache python3 py3-pip && pip3 install paho-mqtt' returned a non-zero code: 1
```
-
### Describe the issue you are experiencing
Changed router on LAN (so DHCP changed). HA (on x86 PC) acquired an IP address. Appeared to reboot OK - BUT could not be seen on network by other devices, …
-
https://mqxu.top/2024/03/09/chun-tian-de-kui-zeng-shi-man-man-bian-hao-de-zi-ji/
开到荼蘼
mqxu updated
4 months ago
-
### Please verify that you have read and understood the guidelines.
yes
### A clear and concise description of the issue.
IDK if I missed it at some point, but I could not find in the advanced sec…
-
### The problem
Running a standard backup - with the Google drive add-on. Backup (manual or scheduled kickoff) starts but fails. Partial backup works fine. Had issue earlier but it came good after …
-
### What happened?
```
info A dev server is already running for this project on port 8081.
info Installing the app...
> Task :react-native-screens:compileDebugKotlin FAILED
> Task :react-nati…
-
As promissed in the docs, bare Agda, fails to find the standard library
```bash
[hao@wendy:~/dev/agda]$ agda --compile hello-world.agda
Checking hello-world (/home/hao/dev/agda/hello-world.agda).
…
-
### Describe the issue you are experiencing
After upgrade to 12.3 my Home Assistant SkyConnect/ZHA is no longer working.
I've tried every possible reboot and restore from backup combination possi…