-
Hallo zusammen
Was bleibt den so übrig nach eurer Reglung?
Was speißt Ihr so ins Netz ein im Durschschnitt bei 600/800/etc Watt.
gruß Fatzo
fatzo updated
2 months ago
-
Hi all,
I have a Hub 2000 and wanted to test the Solarflow status page. Currently, I am using Home Assistant with Mosquitto and subscribed to the mqtt.zen-iot.com. However, I experienced that a lot…
-
### What happened?
I tried to use a PCD8544 display but it remains blank.
After testing https://github.com/tbnobody/OpenDTU/pull/650 and a lot of investigation the display shows some data.
But I ha…
-
### What happened?
Not sure if this is being tracked already (no results according to search) - but on HMS inverters there seems to exist an error event with ID 52 that has no description:
![image…
-
### What happened?
Sometimes the inverter is stopped for unknown reasons, even though there is enough energy available.
Today:
![image](https://github.com/helgeerbe/OpenDTU-OnBattery/assets/9161491…
-
## Hardware
* [ ] ESP8266
* [x] ESP32
* [ ] Raspberry Pi
### nRF24L01+ Module
* [x] nRF24L01+ you verified this is a **Plus model** capable of the required 256kBit/s mode
* [ ] **square …
-
### What happened?
Es gelingt nicht, das Limit für einen Hoymiles-Wechselrichter über python und OpenDTU dauerhaft zu setzen.
### To Reproduce Bug
```
# limit_type = 0 AbsoluteNonPersistent
# lim…
-
**Describe the bug**
the device model displayed for the inverter is incorrect.
If HMS-2000-4T is used, HMS-1600-4T is displayed
**To Reproduce**
1. install the integration
2. Einstellungen -> G…
-
**Thanks**
First thanks for great tool.
I made a docker container and found a issue on 2 commands with json output.
**Describe the bug**
Output as json generates some errors with hms800w-2t and…
-
In Ticket #4 fragte @karrenbauer
> wie bekomme ich Daten von WR2?
Hier die Antwort:
Die Daten des zweiten Inverters stehen schon in der Variable `r` drin.
Schau mal in die [WebAPI ](https:/…