-
I'm doing some research on the `hwmon` "SUBSYSTEM" in Linux. I started with the search term ['linux hwmon subsystem'](https://duckduckgo.com/?t=ffab&q=linux+hwmon+subsystem&ia=web). The very first ite…
-
@kevinl95 I purchased a new M5Stack CoreInk device, downloaded the code, and tried to compile it with no success..
The code generates some warnings, but I assume the sketch will compile even with …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
# Required information
* Camera board id: 30678
* OpenIPC version: 2.4.03.21-lite
* Commit: 5e19ba2
* Branch: master
* Tag:
* installation method: uboot upload
* modified majestic.…
-
The Mbed I2C implementation has two restrictions that are easy to violate:
- Only one I2C object may be created for each I2C peripheral on the chip
- The frequency must be set at the bus level, not …
-
This is not actually a feature request but maybe could help to test some issues:
The scheme of this project is to use an ESP8266 or ESP32 as host master to connect arduinos to the server.
The issu…
-
The I2C device is selected in the begin function but, by calling begin twice with 2 different devices, 2 devices would be used and the interrupt handlers would stay dangling.
It would be better to mo…
-
Hello,
I'm booting RK3288 Tinker Board with Raspberry Camera Module V2 attached (IMX219). Here is the output of dmesg | grep i2c
[ 0.751264] i2c /dev entries driver
[ 0.759772] of_get_nam…
-
### Category
BLE
### Hardware
Other
### Firmware Version
2.4.3.91d6612
### Description
**What happened**
1. Install new firmware (2.4.3.91d6612)
2. Open phone to pair to Heltec Mesh Node T114…
-
Devices ACK on addresses 0x4A and 0X46, but library won't allow both to init.
RP2040 (As KB2040)
### Steps to reproduce
Daisychain two BNO086 via Qwiic connectors, jump address pin on one un…