-
FDS 6.3.2
Windows 7 x64
I have a question concerning the verification case [energy_budget_adiabatic_walls.fds](https://github.com/firemodels/fds-smv/blob/development/Verification/Energy_Budget/energy…
-
Hi to everybody,
We've modeled a watermist system using nozzle installed close to roof.
Now we are having problem with particles distribution.
I attach some images to explain better our problem.
In …
-
water_evaporation_3 is the only case in that series not meeting its tolerance. A little investigation shows that as we go from complete evaporation to remaining liquid that error increases. I modifi…
-
I'm trying to simulate a fire with an open boundary at one side. The open boundary requires loss coefficient of 1. I tried two methods:
HVAC_SAMPLE_TEST_1
I set up a HVAC network adjacent to open bou…
-
```
Make sure one can output the following:
1. Simulation Time v Run Time
2. Time Step v Simulation Time
3. CFL Number v Simulation Time
4. Divergence v Simulation Time
5. CPU Time v Simula…
-
```
Make sure one can output the following:
1. Simulation Time v Run Time
2. Time Step v Simulation Time
3. CFL Number v Simulation Time
4. Divergence v Simulation Time
5. CPU Time v Simula…
-
```
The attached fds input file, adapted from the box burn-away example gives
in its output 'out' file the followiing:
Time Step 82300 June 28, 2007 19:44:25
> ----------------------------…
-
```
Simo,
The part_attenuation case in Verification/Radiation/ runs fine with lates code, and
the verification script processes the results. But the plot just shows some lines
and the "Reference" in…
-
```
Please complete the following lines...
Application Version: 5.5.0
SVN Revision Number: 6004
Compile Date: 05 Apr 2010
Operating System: Microsoft Windows XP Professional 2002
In the example belo…
-
```
Application Version: 5.1.1
SVN Revision Number: 6385
Compile Date: 22 jun 2010
Operating System: normal PC
Dear K. McGrattan et all,
After my last post about the pressure drop over a…