-
**MQTT Reconnect**
After a network error tha gatway falls in "client disconnesso" state and does not reconnect (following a short sample from the log):
```
19:38:55.658 [pool-2-thread-1] ERROR …
-
(improvement) Any plans on adding MQTT support?
A subscribe and publish function would be useful for adding triggers from outside the system, the daylight sensor already seems to be of a similar forma…
-
Even though I discourage to use different messages for the publish operation and the subscribe operation, it's something people are doing so we have to support it. Example:
https://ubidots.com/docs…
-
Hello,
I would like like to ask is it possible to wait with subscriber ACKs until messsage is handled in "message_arrived" callback?
I observed that ACKs for MQTT broker are sent before execution …
-
Hello everyone,
I was wondering whether it is possible to enable mosquitto MQTT broker to support tracing with open telemetry standard which would bring a lot of benefit for monitoring and tracing …
-
[NodeMCU](http://www.nodemcu.com/index_cn.html)
- https://github.com/nodemcu/nodemcu-firmware
- https://github.com/esp8266/Arduino
- https://github.com/nodemcu/nodemcu-devkit-v1.0
- https://gith…
-
Do the c libraries support metric properties? I'm sending a payload using python, it gets picked up by mqtt.fx and decoded into the following JSON:
{
"timestamp": 1582763391701,
"metrics"…
-
### To help us save time and help you faster
Before opening a new issue, please make sure that there isn't already an open (or closed/resolved) issue reporting the same problem. Please always open …
-
Hi,
I am using v1.6.13 of the Mosquitto Broker with MQTT Protocol 3.1.1
I have set the `max_queued_messages` to 0.
`max_inflight_messages` is at its default value itself.
There is a publishe…
-
Hi,
I'm using the MQTT status interface, which seems to work fine.
I have set a rate limit to an update every 30 second, and indeed I see updates on Mosquito every 30 seconds.
However when I che…