-
The 8 HSTX pins are not included in the pinout, so the new HSTX functionality in the RP2350 cannot be used.
This is despite the HSTX peripheral being mentioned in the documentation, without a cavea…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.2.0-alpha.2350-6-gf064354648-dirty on 2024-08-13; SparkFun Pro Micro RP2350 with rp2350a
```
### Code/REPL
```python
import b…
-
Hi
I am trying to run the quadrature encoder example that uses PIO functionality:
github.com/raspberrypi/pico-examples/tree/master/pio/quadrature_encoder
I have a rotary encoder attached to GPI…
-
Hi
Under the supported boards listing there are the following Pimoroni boards listed;
Pimoroni PGA2040
Pimoroni Pico Plus 2
Pimoroni Plasma2040
Pimoroni Tiny2040
Pimoroni Tiny2350
However und…
-
In section 5.9.5.1. Minimum Arm IMAGE_DEF, the word number 2 is written as 3 (thus there are two word 3) in the table showing the 20-byte sequence.
-
In section 5.9.3.1 IMAGE_DEF item in RP2350 datasheet, I think "bits 11, field reserved, values 0" has to be added to the table. At the moment, bit 11 is not defined.
-
Came across https://www.solder.party/docs/rp2350-stamp-xl/ and it links to this repo but I don't see any footprints for the newer RP2350 Stamp XL, only the older RP2040s.
-
Experiment: Copy over the flash_nuke.uf2 to RP2350 based PICO 2 board
Observation: nothing happens.
Expected behaviour: Controller is rebooted and flash is empty.
Actual behaviour: Nothing happe…
-
In the [Hardware Design with RP2350](https://datasheets.raspberrypi.com/rp2350/hardware-design-with-rp2350.pdf) document, a minimal KiCad example is linked at https://datasheets.raspberrypi.com/rp2350…
-
Hi there,
I tried running the following code on Raspberry Pi Pico, Pico W, and Pico 2:
``` C++
/*
This Arduino receive and decode infrared (IR) signals from a remote control. It uses
the…