-
Hello and good day! Starting new with ntop and nprobe; both are licensed and operational:
`/usr/bin/ntopng -e -i eth0 -i lo -i= zmq://127.0.0.1:5556c -w 3000 -n 1`
`/usr/bin/nprobe -n none -T "@NTO…
-
Hi, I was wondering if the code (only talking about the contour next module from pazaan) could be adapted and deployed to an esp32 using micropython? The idea would be to then use BLE advertising to b…
-
**Checklist:**
- [x] I updated to the latest version available
- [x] I checked that my MQTT broker is otherwise working
**Release with the issue:**
v1.8.5
**Last working release (if kno…
-
I tried installing from your install instructions here, as well as installing from Pi Apps (this is the current install). I get an hourglass, then nothing. Per # 39, I have included the output from …
-
Love the idea, I'll love it more when I can get a build for my RPI 4, and I can sus out the issue below.
motionEye Version | 0.40
Motion Version | 4.2.2
OS Version | motionEyeOS 20190427
Chrome …
-
This worked fine for me for several years, but now - after a fresh installation of BOOKWORM, it fail.
The Shutdown-Functionality does not work any longer. I made a fresh Bookworm installation from s…
-
I am trying to figure out why I am getting a "Connection error" with the zm-applet and Zoneminder 1.34.1. Do you know if the applet works with Zoneminder 1.34 and their new api setup? I'm willing to…
-
Hi!
I have uploaded the sketch on an esp32 board (wroom32), but i have strange spikes only for moisture. It often drop 7-8% down.
Miflora Firmware 3.1.9
![2020-01-08 11_02_32-Window](https://use…
-
**Describe the problem**
RPi4 running Balena does not produce audio over USB soundcards
**To Reproduce**
Boot RPi with Balena with USB soundcards plugged in -- audio will play over the 3.5mm but …
-
```
Need a way to monitor the network status of each of the 18 rPi stations and the
Master Server on the network. Maybe this should be written in Python. Perhaps
it should have large red/green indic…