-
MakerPlayground, SHT30-DIS-B sensor
Unable to read temperature value in interactive mode.
While humidity value reading works is usual.
-
Jó reggelt!
First of all, thanks for your work. I love your ideas and resolution.
I ordered a couple of iAQ sensors and also two STH3x to try out this development.
I've tried in two Wemos D1 mini…
-
Hi,
I've experimented with this software a while back it worked very nice on my Sonos device. I also have a Wemos D1 mini device which was used at the time to experiment the software and the JSON s…
-
**sensor_led** component which should blink on warning or error from other components does not begin to blink if an i2c sensor is diconnected.
The DUT is an ESP32D with a red LED wired to IO12 thro…
-
Domoticz supports battery level indicator which is useful for battery-powered applications such as weather stations or sensors in general. To make battery level report work, all that needs to be done …
-
Hi all,
I am writing a project of webthing-arduino library, an air conditioner controller using Wemos D1 mini, IR Controller Shield, and SHT30 Shield. Then I would like to propose it as an example fo…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
VMWare running Hassio with esphome ESPHome 1.12.2 add-on
ESP8366, Wemos D1 mini with shields stacked.
WS2812B RGB shield - hw-7…
-
既存の[@chirimen-raspi](https://www.npmjs.com/org/chirimen-raspi)にあるドライバー群を[@chirimen](https://www.npmjs.com/org/chirimen)に移行する
-
Hi, i have installed tasmota on my LOLIN D1 mini and i'm using the IR controller shield and the SHT30 shield. They are working fine but i would like to add the PIR shield, the problem is that he use t…
-
Having difficulty adding SHT35 sensor. Added dependencies for SHT31 and grove.py, had it working for a while but no longer.
[Mycodo log v1.txt](https://github.com/kizniche/Mycodo/files/3614537/Mycodo…