-
Works with previous release (2021.08) but not functioning in the latest. Enter the ? to activate the menu and no response. Repeated entry gets garbage like it's the BAUD rate, but that is set properly…
-
As shown in the following pictures, on the latest firmware releases, if we attempt to change large ares of the maps with < > cursors on the keyboard, a protocol error appears, and a reset of the bard …
-
As for example for D30 and D34 on teensy 3.5 the output of the pins when switching to high is about 0,75V so these ports are not usable as output channels.
I'm using my own designed teensy 3.5 adap…
-
I have two things to ask about injector lag timing:
1. We have an opening lag time vs voltage calibration curve but have no handy tool to obtain correct values. I do know two methods to obtain cor…
-
2 initialization tests fail:
- `test\test_misc\tests_misc.cpp:51:test_initialisation_outputs_V03:FAIL: Expected 1 Was 0. Idle 2 [FAILED]`
- `test\test_misc\tests_misc.cpp:80:test_initialisation_ou…
-
When I try to adjust my Y axis for load, speeduino automatically changes my inputted values to only even numbers. But for ALPHA-N I’d like to use the odd numbers for a better tuning of my spark, fuel,…
-
- [ 🟢 ] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
*You can erase any parts of this template not applicable to your Issue.*
-----------------------…
-
I would like to port the complete speeduino code to C167 and therefore almost all ME7 Bosch ECUs.
Although i have completley reverse engineered a ME7 and labeled almost anything and also understand m…
-
The array fsIntIndex contains all the indexes in currentStatus that should be considered as a double byte value. Indexes not present in this array are considered single byte values. For comparison in …
-
I am working on a pi dashboard using tuner studio and noticed there is no indicator available to see when your radiator fan is running. It would be nice to have that feature.
I am also curious abo…