-
Hey everyone, I'm having trouble with my Orange Pi 5 Pro and could use some help. Here's what's happening: - When I insert the SD card, the board doesn't boot
- Only the red LED lights up
- I'm ge…
-
# Issue Report #
## Bug ##
### Container Linux Version ###
```
CoreOS 1520.6.0
```
### Environment ###
Dell Inc. PowerEdge R630/0CNCJW,
### Expected Behavior ###
System has stable n…
-
I want to add this port to an application with a large code base.
The code base is compiled on windows with msys and arm-eabi-toolchain (gcc-linaro-6.2.1-20170623-win32). I got the compiler on my com…
-
It's not possible to enter [FEL](https://linux-sunxi.org/FEL) through holding **RESET1** button and the powering up with the USB cable connected to the USB-OTG.
Using the UBOOT1 button seems to pre…
-
### Describe the bug
360T7-108M编译成功,刷机后无限重启
TTL返回
Hit any key to stop autoboot: 3 No size specified -> Using max size (3047424)
Read 3047424 bytes from volume kernel to 0000000046000000
## Load…
-
I'm using a Radxa CM3 module on a Raspberry Pi CM4 IO Board.
I built the image as described, and flashed it onto the internal eMMC.
The board starts U-Boot SPL, but then hangs after verifying the ch…
-
Amazing work. I tried the bookworm rc1 and trixie rc5 images with 1 out of 2 different FullHD monitors connected either to HDMI1 or HDMI2 and the boot fine except there is no graphical output. The mon…
-
A server (Xeon ES-1620 on X99-M) which has booted until Clear Linux 37700 did not boot after 37780.
A boot process hanged after a line:
```
[ 15.971632] systemd-journald[289]: Successfully sen…
-
**Device Information | 设备信息**
- SOC: [e.g. S095x3] > S905L3(gxlx2_p291_1g)
- Model [e.g. HK1] >
```
adb -s 192.168.6.174:5555 shell getprop | findstr model
[ro.camera.exif.model]: [m200]
[r…
-
# 0x22_LinuxKernel_内核活动(二)中断体系结构(中断上文)
基于ARM64体系结构,我们了解了在CPU上面关于异常处理的一些知识储备,并知道中断如何产生,并对中断一些术语进行了精准的校正。可以参考:
* [10_ARMv8_异常处理(一) - 入口与返回、栈选择、异常向量表](https://github.com/carloscn/blog/issues/47)
…