-
Hello,
how far off are you from https://sourceforge.net/projects/ethernut/ HEAD? Any intention to offer it?
Please note, I will be mostly offline until Sep.1
-
I often design boards that use a potential divider to permit measuring voltages above the maximum for the part.
In this case, I set the channel's `zephyr,vref-mv` property to be the "_top_" of the di…
-
Recently I've started to learn the internals of NuttX. I'm currently using [nucleo f429zi](https://www.st.com/en/evaluation-tools/nucleo-f429zi.html) board.
While looking at lower half stm32 serial…
-
Hi, is it possible to use SdFat with the STM32 SDMMC interface?
-
#### Description
While testing #15914 I realized that `riotboot/flashwrite` has been broken on stm32wb for a while. It seems to be caused by the following sections:
https://github.com/RIOT-OS/R…
-
I put some trap in mutexLock code (thanks @xvuko for asserion test as an inspiration)
```diff
diff --git a/sys/threads.c b/sys/threads.c
index 42ecf87..f7e5c2a 100644
--- a/sys/threads.c
+++ b/…
-
Hello, I am developing the firmware for TI MSP430F5438A to control MPU-9250 via SPI.
However, I found that the result which I received is so strange.
This is the result of acceleration when I put the …
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance, …
-
Hi !
I want to inquire the pinout and configuration setting detail in DFSDM L496G. Such as the the setting in channel, filter, clock. Because the situation is that I want to add DFSDM in another proj…
-
Hi,
I searched in all files and git issues but I could not find this information : **is it possible to generate an interruption from VBUS** ?
I think you understand why : I want to immediatly etabl…