-
I have a feeling this is why I cannot receive fsk or lora packets. My payload is completely custom with no Lorawan stuff. Is this why no packets are being logged?
If this is the case how can I modi…
-
- [ x] The issue is present in the latest release.
- [ x] I have searched the [issues](https://github.com/brocaar/chirpstack-gateway-bridge) of this repository and believe that this is not a duplicat…
-
I haven't been able to connect my device on the helium network using my own mikrotik/gateway-rs. I've placed the device really close to the mikrotik router so from the rssi I could confirm if it's my …
-
Is it possible to disable or override the built-in AGC firmware?
There seem to be SX1301 registers suggesting that this is possible:
https://github.com/Lora-net/lora_gateway/blob/a955619271b5d0a4…
-
I used the SX1301 simulator node to do the stress test. When SF7, I sent about 800 packets per minute, but the gateway display can only receive about half. When I turn off the gateway TX, the gateway …
-
When I first power on the board , there is a error message : "ERROR: Version of calibration firmware not expected, actual:4 expected:2"
But when i reset the board by hand, the error disappear ,and th…
-
I have looked and looked and am not able to find out how to do the following.
Many people include a log file of dialog that appears to come from the Packet Forwarder. I have seen this here and at T…
-
I'm looking for some guidance to tweak the US frequencies on the Things Node so I can use it to test my gateway deployments.
The TTN US-915 frequencies are defined like this [1]. My gateways are u…
-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-application-server/issues) of this repository and believe that this …
-
maybe not so much an issue but how to enable GPS on the DIY-RAK2287 variant.
I'm using a plain Raspi Pi4 4Gb with a RAK2287 with the GPS antenna connected.
BTW, I'm receiving traffic and familia…