-
I am using @SpenceKonde DxCore, chip AVR128DA28(no bootloader). Fantastic core. It was at version 1.3.2, tonight my Arduino IDE (used for compiling because VS Code setup simply doesn't work out of the…
-
I ran the ReceiveDemo_Simple on the Arduino UNO and it works flawlessly. (Thanks a lot for that.)
Then I tried that same example on my actual board with the Attiny1614. (new tinyAVR series 1).
And i…
-
**Description**
The download page includes a link to several examples for getting started with the AVR using Atmel start.
I am more interested in the Ep 24 - Self-Programming and Bootloaders.
**C…
-
Hi Spence,
after updating to 1.5.1 on my Linux, "I can't upload" the blink-sketch:
```
/home/stefan/.arduino15/packages/ATTinyCore/tools/micronucleus/2.5-azd1/micronucleus-2.5/micronucleus --no-ans…
-
Arduino: 1.8.13 (Mac OS X), Board: "20-pin tinyAVR 0/1/2-series (ATtinyxxy6), No (saves space), ATtiny3216, 20 MHz Internal, 1.8V (5 MHz or less), Disabled/Disabled, EEPROM retained, Enabled (default …
-
First of all, I've used some code I found over at the official Optiboot repo. Using this code I've been able to create a working optiboot.h/cpp library that my new [Flash library](https://github.com/M…
-
**Edit by Spence** _The version of the Wire1 library referred to here has been pulled from the core for v 1.3.3 and later, since it was unfit for any purpose largely due to this issue. We still really…
-
Not an issue, more a request.
With only 256 bytes of EEPROM (plus User Row) many people will need to write to the APPDATA area for internal storage on the "0" and "1" series processors.
After in…
-
1. Example code - you have some examples on your blog. Create a "dummy" library (ie, named ATtiny10Core - or with whatever capitalization you like; ATtiny seems to be the most "correct", I only have A…
-
After downloading 2.2.8 into an old program that worked long time ago the PWM on PA3 quit. Hardware still works because blink turns the pin on and off. Do I have to go back and retro 2.1.5 to prove…