-
### Configuration
**Operating system**:
mac os 12.3.1
**PlatformIO Version** (`platformio --version`):
PlatformIO Core, version 5.2.5
### Description of problem
Upload fails if specified…
-
New module is being released in May. As soon as appropriate tech specs are available, should add the module to this library.
See: https://blog.arduino.cc/2023/03/25/arduino-uno-r4/
-
I tried to use my old sketch with the header icp101xx.h and `ICP101xx mysensor;` but got never a connection with the new Uno R4.
The sensor is connected over the Qwiic/Stemma connector on the board a…
-
Using an arduino nano esp32, I always get -127 as a result with the `Simple.ino` example.
I tried with some resistors, 1K and 4.7K, even then it's on a breadboard so the cables are very short.
I al…
-
I have been working on this problem for over two months. I was running "Example1_GetPositionAccuracy.ino" on Arduino UNO. However, without any warning, it suddenly became unable to execute after a cer…
-
While uploading to the WiFi board I keep having issues with it returning errors about not finding com port and can not upload even though the Wifi Board is shown in the boards menu along with the com …
-
This bug was detected when implementing UDP communication, however, it likely impacts Serial as well.
The code below includes sending two structures with the same layout. However, the fails struct…
-
How can we configure and use the OPAMP? I could not find any code related to the OPAMP peripheral in the core. Only there are a few defines in the variants directory.
-
I am sorry if this is a dumb mistake on my part, but I cannot figure out what I am doing wrong. When I try the compile using IDE 2.2.0 the following code I am getting the error: "Compilation error: 'A…
-
Sadly the referred Git repository at
1. https://github.com/arduino/ArduinoCore-renesas/blob/fbb44b6a9a6e0e5fbbc3480a8f3f6a5237de3c67/bootloaders/SANTIAGO/README.md?plain=1#L3
2. https://github.com…