-
### 详细叙述
X86 J4125四口主机，看到最近加入了r8157 5G USB有线网卡支持，迫不及待买来测试。
可以正常识别，显示为第五个网口eth4，并加入LAN。刚插入网线的前几秒可以用，但10秒左右就会…
-
### The problem
Since I've upgraded to 2024.1.0 my ZigBee devices (lights, switches, fans etc) are having a few seconds/minutes delay in responding to commands. I have tried to restore to previous …
-
### Problem description
Problem description
Only device exist, with anything else.
TS0601
por _TZE204_81yrt3lo
Conectado a través de [Zigbee Coordinator]IEEE: a4:c1:38:54:5f:2b:61:16
Nwk: 0x…
-
### Bug description
2023-10-28 00:11:49.589 WARNING (MainThread) [homeassistant.components.zha.core.cluster_handlers] [0x7AF6:2:0x0300]: [Min mireds is 0, setting to 153] Please open an issue on the …
-
### The problem
Hello,
Running migration from POP coordinato to Skyconnect coordinator (ZHA. With POP dongle no problems with the same sensor. But after restart weather aqara sensor were ok but t…
-
### The problem
Never had an issue and now I'm getting the following error on various Zigbee devices - Failed to deliver message:
### What version of Home Assistant Core has the issue?
core-2024.8…
-
**Is your feature request related to a problem? Please describe.**
Is possible to write a quirk for the device i subject? Attached are diagnostic information
**Describe the solution you'd like**…
-
### The problem
Randomly, Zigbee ZHA devices won't work (appear as unavailable) and the aforementioned error is reported. Had the same error with varying success from prior versions of Core. If it …
-
### Problem description
I have a tuya roller blind (see signature below). When I do any of {set position,open,close}, it's stuck in the opening/closing state forever.
The controls reflect such a s…
-
**Is your feature request related to a problem? Please describe.**
I have bought [this ](https://www.amazon.de/dp/B09TW36J98/) power strip from amazon, it should be working with zha (according to [ht…