-
Hello,
I'm trying to decode my awnings RF codes, I'm using a Wemos D1 and a RXB6 receiver and I have this PINs config:
```
#ifdef ESP8266
// ESP8266 D1 Mini
#define PIN_RF_RX_PMOS_0 NOT_A_PIN /…
-
I'd like to see support for this protocol.
I know that this is open source, and I'm happy to contribute, but it's a little difficult figuring out how to start. Not the github stuff, or the tool ch…
-
Hello All,
Hoping to get some assistance with this issue. Been having problems for a while and cannot figure out how to fix it. This is a very similar problem to #222 (minus the use of docker) and …
-
Is there any chance in the future for the codesend app from 433Utils?
Currently I control my devices like this:
sudo ./codesend 16776961 -l 412
where 16776961 is the code from RFSniffer and 412 is …
-
@[Are]())) you receiving `Starting LoRa failed` while using the demo code?
PLEASE see the [FAQ #1](https://github.com/sandeepmistry/arduino-LoRa#faq) about using [setPins](https://github.com/sande…
-
Hi,
We need an example code that works / with Lopy4 - The things Network for US frequency, we have several projects running with Pycom boards, there are too many flaws with these devices.
This c…
-
**Describe the problem you have/What new integration you would like**
It seems to me there is no support for a 868 MHz tranceiver to receive and emit custom signals.
**Please describe your u…
-
### Current Situation
Hello,
I bought by accident an UART board with the SX1278 (see link below).
Do you plan to add a UART mode to your code?
https://de.aliexpress.com/item/32791728376.html?a…
-
The boards.txt file references a non-existent file. Is there a way to acquire it, or is it unnecessary?
When I try to upload a sketch, I see this error message:
```
Bootloader file specified b…
-
I can see in the Telldus API that there is a "lastUpdated" timestamp info that is the time when last time value was updated.. is it possible to include that info..
I have few temp/hum sensor from t…