-
## Expected Behavior
Trying to build OMR with tag v0.59rc1 with the following :
git clone https://github.com/Ysurac/openmptcprouter.git
cd openmptcprouter
git checkout develop
OMR_TARGET="rpi4"…
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A:昨天编译的固件版本跟之前选择的包一样,能编译成功,但是启动后ip6tables运行异常,遇到ip6tables -t mangle命令就报“ip6tables v1.…
-
Maintainers: @guidosarducci @hauke @dedeckeh @dangowrt
# ERROR DESCRIPTION
When building the config file below, the build **always** fails when building IPROUTE2-TCFULL package using a single thr…
-
## Steps to reproduce:
1. Install 22.03.0-rc1
2. Go to the Status menu
3. Notice two entries: Firewall (iptables) and Firewall (nftables)
## Actual behavior:
Two entries in the menu
## E…
-
Hi Yannick,
I would need to add latency to some network interfaces for them to be in line with others (satellite - 4G)
Tried setting interface - advanced - latency to 500 but that did not seem t…
-
在/root/openwrt-hc5x61-cc/ImageBuilder-MT7628文件夹运行这个命令
make BUILDER=OpenWrt-ImageBuilder-15.05-ramips-mt7628.Linux-x86_64 SDK=OpenWrt-SDK-15.05-ramips-mt7628_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_6…
-
OpenWrt snapshot built from 2c26eb4e484fe6d7a8159a22f97b6db7ca6e9221 running on ASUS RT-AC85P
Brief setup description: PC and NAS (`00:1e:06:xx:xx:xx`) each plugged into one port of the router (`d4…
sfan5 updated
2 years ago
-
**Describe the bug**
I have an OPNsense 21.7 box on CenturyLink Fiber, and whenever the PPPoE session changes the IPv4 (which for some reason happens often), and therefore the IPv6 which is via 6rd…
-
## Expected Behavior
## Current Behavior
divyansh@divyansh-Latitude-7480:~/rpi_cm4_bloom/openmptcprouter/x86/custom_build/openmptcprouter$ OMR_TARGET="x86_64" OMR_FEED_SRC="v0.59rc1" ./bui…
-
我用的是 Lede源码。不管如何删减插件,只保留我必须的几个插件,都还是超过限制。我在[其他仓库](https://github.com/MrH723/Actions-OpenWrt)看到一个编译 k2p 的。他的插件比我选择的多,但是却只有 13MB。内核也是 5.4 。用的也是 Lede源码的 master 分支。是不是我哪里有问题呢?这是我的 config 文件:
```
CONFIG_…