-
I couldnt get the Onewire working for IoT Edge on Raspberry.
IoT Edge on Rasperry: this mean Linux on Raspberry and solution is running as a docker on it.
I2C is working and docker can see it. I hav…
-
The Portmaster was not able to initialize the nfqueue. This might be connected to #82 - but in that case the error later changed to not being able to initialize iptables itself.
**What happened**:
…
-
Powered by LuCI lede-17.01 branch (git-17.152.82987-7f6fc16) / LEDE Reboot 17.01.2 r3435-65eec8bd5f
[ 1137.020013] ------------[ cut here ]------------
[ 1137.022631] WARNING: CPU: 0 PID: 0 at ne…
-
Hi guys, I can't install my kernel after gerate RPM' files, I try for 4 times to rebuild the kernel, with and without Cattarrapas modules I only use to set fsync everytime, I try to disable ACS and en…
-
What is the level of effort to support the 800 version of the chip? I love the idea of a full C# version of DS1820B temperature monitors, but I do not want to be limited by 4 sensors.
-
Using GPIO4 that is.
Has someone managed to read emulated senors with Raspberry Pi via GPIO?
Hardware 18B20 on either side of a level shifter work as expected, the emulated sensors are a no-go. (A…
-
I have an LM75A temperature sensor breakout board connected to an F411-Wing flight controller.
![LM75A](https://user-images.githubusercontent.com/47995726/55283024-0e87c980-53a5-11e9-8524-33c040214…
-
Firstly, thanks for a great project. Just started using it but going well so far.
I need a OneWireDeviceHandler ctor with a I2cDevice instead of the AD0/AD1 parameters. Long story but basically I a…
-
The Power/Volume buttons worked perfectly with kernel version 5.9.13, but stopped working after the upgrade to 5.10.1
After updating the kernel from `5.9.13-surface` to `5.10.1-surface` via…
-
Hi,
I am trying to simulate latest Linux with spike on Ubuntu 16.04. But it seems that the device tree cannot be initialized successfully.
The version of related repositories as listed as belows…