-
## Environment
- Development Kit: [ESP32-Wrover-Kit]
- Kit version (for WroverKit): [v1|v2|v3|v4]
- Module or chip used: [ESP32-WROVER-I]
- IDF version (run ``git describe --tags`` to find…
-
### The problem
After enabling `esp32_ble_tracker` in the config, the device will no longer be reachable via the mDNS hostname (breaking the log and OTA). If I manually set a DNS entry for the corr…
-
748 / 5,000
I am working with esphome on esp32 and CC1101. I receive the telegrams from my water meter but they are not decoded.
[18:26:08][VV][wmbus:061]: Have data from CC1101 ...
**[18:26:08][…
-
### The problem
When using the Pulse Counter Sensor pullups are active and can't be disabled (pullup: false does not do anything either).
If I configure the same Pins as simple binary sensor pullups…
-
Hi!,
I need to do an OTA update with an ESP32-S3-DevKitC-1 via Ethernet but it seems that the example doesn´t work with Ethernet. I get the following error:
`CheckForOTAUpdate returned 1 (HTTP GET…
-
Hi! Firstly -- fantastic work here. I'm running into an issue at the final step of adoption & ESPhome installation. Flashing worked fine, and I have the device on-network and addressable by ESPhome. H…
-
### The problem
Hello,
I've created a new esp32-c3-devkitm-1 device but esphome failed to compile, even with the default yaml config.
My process was:
- Plug the ESP32 C3 Super Mini via usb C t…
-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
-
### The problem
During the developement of a project esphome suddenly does not compile anymore. it worked fine in the beginning. Suddenly files in src/esphome/components/sensor/ seemed to be missing…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…