-
Hi, I startef using this app to control my heatpump at my cabin and it needs a lot if buttons. Is there any way to copy/export the layouts from my phone to other devices? Great app btw! :)
-
I've been able to successfully install the Bepacom-BACnet-IP-Installation.
It found my GTW-21 BACnet device from the heatpump manufacturer Brötje (BDR Thermea Group). It is a BACnet certified device…
-
There are 2 sensors created for energy consumption prognose heating
Problem is in duplicate code in custom_components/degree_days/cont.pu from line 188-195, :
```
HEATPUMP_SENSOR_TYPES: tuple[Deg…
-
I'm trying to run the Heatpump example with OpenModelica. I cant simulate it because there is a problem with the Sensor SensTp. The Sensor doesnt exist at the specified directory (but in the FluidFlow…
-
Hi Mosibi great job, I have a question for the switch with the bitmask option. When I turn on the switch the bitmask goes on. When I turn off the switch the entire register goes to zero. I tested it b…
-
The Nefit pro control app recently started to show a graph for used KWH and generated KWH for my heatpump. Does this mean the endpoint for KWH consumption can now be found through sniffing the app tra…
-
Simple automation of smart control of my Atlas 12 using this plugin and Home Assistant.
Suggestions welcome!
@CJNE @Mi3czy
Presentation:
[Smart control of Genesis heatpump based on electricit…
-
I'm using AsyncMqttClient on ESP32 + Ardion-ESP. I found, that a lot of messages are lost. I would try to describe a problem:
1. After establishing the connection, I subscribe to 25 topics.
2. MQTT…
-
Board: Arduino Mega 2560 R3 (original)
J5 version: 1.4.0
Node.js version: 12.16.1
In my project, I need a lot of thermometers and facing an issue when trying to read more than two sensors. It doe…
-
I found new Parameter descriptions by tinkering with my
Alpha Innotec WZSV 62K3M Version V3.89.5
Channel 232: Vapourisation_Temperature (Celsius)
Channel 233: Liquefaction_Temperature (Celsius)
…