-
Greetings - i bought myself a ZuluSCSi RP2040.
Im using a 256 gb Sandisk card.
The device was bought to give my old P3 550 mhz new storage possibilities.
The PCI-SCSI adapter is a Tekram DC-390 w…
-
I know ble works by broadcasting and that methods like ccm are available.
In cryptography, a cipher block chaining message authentication code (CBC-MAC) is a technique for constructing a message a…
-
It seems i've come across a rare align error...
The align works everywhere just fine in the past. For some reason, this bit of code creates errors...
[`lib\include\util.h`](https://github.com/se…
-
### Describe the feature
There is already a rust crate of **Zenoh** here:
https://crates.io/crates/zenoh
I'm wondering if there will be a rust **zenoh-pico** crate in the future, because thi…
-
### Description of defect
The program is crashing on the wisun TLS process for the NUCLEO_WB55RG when using the hardware acceleration (**MBEDTLS_CONFIG_HW_SUPPORT**), which is active by default. …
-
I thought about posting this in the forum. It seems like a underlying technical issue so hopefully this will be alright.
I'm using a raspberry pi zero w. Based off of reports by others on the forum…
-
As a user, I do not want random crashes when using the HTU sensor and the device in general
__Background Information__
When using the HTU screen for an extended period of time on Hexi_fullsensor2,…
-
The issue was reported by a user in the Arduino forum, who wants to switch between BLE and WiFi on a regular basis.
[https://forum.arduino.cc/t/repeated-ble-begin-end-crashes-board/885009](https://…
-
I have a simple platformio project.
Compiling gives the following error:
```
.pio\libdeps\nano33ble\Mbed BLE HID\src\Mbed_BLE_HID.cpp:151:30: error: call of overloaded 'millis()' is ambiguous
```
…
-
After #2, the code compiles without modification. However, the application panics when interrupts are enabled. Commenting it out removes this error.
```
10:32:47.098 -> ++ MbedOS Error Info ++
10…