-
When pairing Noctua fans with Ultra Low Noise Adapters, the default lower threshold of 35% isn't enough.
This threshold needs to be upped to 45% to not upset the firmware, when using ULNA.
Describin…
-
ESP_LOGI(TAG, "Fan Speed = %d RPM", RPM);
Change the formatter to %lu for unint_32t
-
**Describe the bug**
Edit: Using FanControl V151
Creating any fan curve and assigning it to the fan control for the Sapphire Nitro+ SE 6900XT doesn't work.
It appears to start adjusting the f…
-
Just wanted to say a massive thank you, the HDD fan noise on my UDM Pro has become an almost low pitch coil whine that just cuts through the room and burries into my brain, and easily out noises all t…
-
Device type: AIO liquid cooler
Product page: https://www.corsair.com/it/it/Categorie/Prodotti/Sistemi-di-raffreddamento-a-liquido/Sistema-di-raffreddamento-a-liquido-per-CPU-iCUE-RGB-ELITE/p/…
-
i set the fan at 0% and 50% but still it wont stop running totally, do you know what i can do
-
I have a MK3S (bought in September, no MMU), currently at 3.9.2.
Today I tried to flash the new 3.9.3 firmware, but it fails at the end of upload. For the avrdude log see below. When this happens, th…
-
Updating to the 3.7.1 firmware for the MK2.5 I have two machines experiencing the same issue where the heatbed is making a loud fast clicking sound from where the connectors/LED are. Rolling back to 3…
-
**Describe the bug**
FanControl controls all my fans, even GPU fans, except one specific fan, which is Chassis Fan 1. My board is ASRock B650M Riptide. When I set a flat curve of either 0% or 100%, t…
-
**Describe the bug**
I updated to 140 and suddenly the RPM value for my CHA_FAN2 connector is always displaying 0. It was displaying the RPM correctly with every version before, tried an automatic pa…