-
Hi,
I'm using espsoftwareserial to communicate with a PZEM-004T using library [https://github.com/olehs/PZEM004T](url).
I got a lot of reading errors and mostly an exceptions occured after a few s…
-
Sdm120
Does not send the correct power value to domoticz
It should send the value x1000 and it does not send
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Yesterday compile 6.1 master tasmota with 2.4.1 and voltageset, currentset, powerset do not work.
Voltageres etc works fine.
Sonoff basic R2
-
Hi.
After installing esp32 in arduino IDE using the updated method ( not the old git method), the pzem-004t sketches can not be compiled.
It worked before when i was using the old method to install …
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
I've installed ESP8266 core 2.4.0 for Arduino 1.8.5 (Windows 7 SP1 64-bit) and immediately encountered problems when comminucating with one of my sensors (MH-Z19) which is utilized through `SoftwareSe…
-
Does the energy consumption total come from the PZEM-004T internal register or is the total calculated by Tasmota? If the latter it would be interesting to compare.
Why is the maximum running total (…
-
Looks way safer to use in high wattage equipements than the sonoff POW.
https://github.com/olehs/PZEM004T
https://www.aliexpress.com/item/PEACEFAIR-AC-100A-Electric-power-monitoring-and-communic…
-
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
- [x] …