-
Hi there,
I tried running the following code on Raspberry Pi Pico, Pico W, and Pico 2:
``` C++
/*
This Arduino receive and decode infrared (IR) signals from a remote control. It uses
the…
-
Hello,
Is it possible to use the new wireless firmware + the clipper LTE module to not only get a pico online but also receive / send SMS?
-
Hi,
Would it be realistic to port this for the Zero 2 W system too? I was what kind of pitfalls would one face for that.
It will definitely need some form of realtime priority, so perhaps set it to …
-
Hi all,
I bought a couple of Pico 2 (**RP2350A0A2**) on launch day, to ultimately replace Pico 1 (RP2040xxxx) in a product design of mine. Overall the RP2350 has been very impressive performance-wi…
-
### Background
We are trying to achieve good idle power consumption on RP2350 in MicroPython. Idle here means sitting at the REPL (with either UART or USB serial) doing nothing. In this case the …
-
If you enable bluetooth in native mode, the Web Builder and visual studio code generates a compilation error.
web builder output:
Command failed: make
/home/dev/RP2040/driver.c: In function 'cy…
-
> I saw that I could successfully mount a tap(e) in all lower case when the name was actually mixed case. However, I couldn't actually LOAD anything from the file, which I'm assuming is because that a…
-
Adding:
```
set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
```
into `CMakeLists.txt` to activate LTO, results in:
```
PICO_SDK_PATH is /home/mateush/pico-sdk-2.0.0
Target board (PICO_BOARD) is 'p…
-
https://datasheets.raspberrypi.com/rp2350/hardware-design-with-rp2350.pdf
Search for: capcitors
On page 7 there is a TBD on the inductor, still valid?
Page 9 " These resistors, R2 and R6" shoul…
-
I finally got my development environment set up - I'm running tests now with release 4.0.1! So far, I've got the Temperature sketch working on a Raspberry Pi Pico W and the PSRAMTest sketch working on…
znmeb updated
1 month ago