-
UAVObjects are important to understand, but don't show up in our documentation.
-
As the Frsky X series rx (X8R, X6R, X4R) seems to output some strange signal (http://www.rcgroups.com/forums/showpost.php?p=29690292&postcount=12856), i had some thoughts about implementing some kind…
-
I have modified my Quanton board to fix the design error in rev 1 where Vbat is connected to PC15 instead of PC5 that it pobably was intended.
Since it was not connected before this should do it... Q…
-
I haven't been able to get a consistent tune out of my rigs since the new split filtering, worse still, with mpu rate @ 1khz and 250hz lpf gyro, the cpu pegs at something like 80%.
I keep getting pit…
fujin updated
9 years ago
-
I have a flawed transmitter with one channel (roll) ranging from 1250 to 1700 instead of a normal 1000-2000 range. Also no transmitter is perfect and each has a slightly different range and midpoint.
…
-
taulabs_master_20150131_232019_4082e9d88c_win32
After starting GCS on Windows 8.1 x64
-
Hi!
This line https://github.com/cleanflight/cleanflight/blob/master/src/main/rx/sumh.c#L117
sumhChannels[channelIndex] = (((uint32_t)(sumhFrame[(channelIndex
-
The windows environment setup wiki page https://github.com/TauLabs/TauLabs/wiki/windows needs to be cleaned up so new developers can get up and running on windows. It appears that there are conflicti…
Felkk updated
9 years ago
-
Missing Status Messages like Flight Modes eg." Stabilized, Position Hold, Alt Hold, Manual Mode" (Only gets Disarmed "0" and Armed "128")
Missing the Temperature status from the MS5611.
-
windows 8.1
Videocard - Intel 4 series
taulabs next_20150321
disappear systemhealth and pfd gadgets
and
welcome screen lug https://yadi.sk/i/wCaUzfGsfSbXE
after clean configuration gadgets is back