-
Есть два Медведя. Один с платой Reborn v2.0, второй Reborn v3.0.
На медведе с платой Reborn2 прошивка 2.1.1 для Reborn2 работает корректно на оси Z. При попытке прошить 2.1.1 или 2.1.2 плату Reborn3 …
-
Hey,
Is it possible to configure a seperate Stepper for the Extruder?
I want to use an ebb42 with usb.
Regards!
-
By any chance do you have some kind a schematic with the actual pinout of the board, especially the head connector? I'm considering keeping my existing head and using your designed PCB to wire the hea…
-
I have problems with my BIGTREETECH SKR 2 board with a STM32 F429 chip on it.
I am using the current "Marlin-bugfix-2.0.9.2.x" branch from just now.
Performs builds for the BIGTREE_SKR_2_F429 enviro…
qulet updated
2 years ago
-
I'm just throwing this idea out there
With the increasing number of advancements in 3D printing hardware, I think we could hit a wall when it comes to Arduino IO pins. For example, I have an Azteeg…
-
**What is Coast?**
Coast is a slicer setting that you can enable and configure to force the extruder to stop extruding material towards the end of its extrusion path. While the extruder is no longer …
-
No diagram to assist connecting TFT 35 E3 to stock creality motherboard
-
Sir, my Extruder 1 is not working, its connected to E4 port
E0 (connected to E3) and E2 (connected to E5) working well
there is no problem with Driver Or Motor (i checked with swapping with other dr…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
This is a known issue, first reported here: #23248 This Tickets has then be closed automatica…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I have done a board modification on the stock Ender 3 v2 mainboard (4.2.2 with TMC2208 steppe…