-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
method ssd1306_I2C_WriteMulti is incorrect.
HAL_I2C_Master_Transmit(m_hi2c, address, dt, *count+1*, 10);
need +1 to fill the last col.
-
### Background
The `CONFIG_USB_DEVICE_NETWORK_RNDIS` configuration option enables the USB Remote Network Driver Interface Specification (RNDIS) in Zephyr. This allows a device to appear as a networ…
-
This has been left unattanded since it was turned on. The first message was transmit…
-
It would be great if you could switch between a receiver and a transmitter using this native code. Is a transmitting feature coming in a future push?
-
```
What steps will reproduce the problem?
1. Any outbound or inbound call
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating s…
-
hi,
i try to send an json string to mqtt like so:
```
const char topic[] = "Hoechst/PHI-Log/data/json";
.....
mqttClient.beginMessage(topic);
serializeJson(doc, mqt…
-
What if the connection between srt-live-transmit always breaks when the packet loss is set to a higher level? for example:
layed for 0.472 ms
14:23:38.876378/SRT:TsbPd!W:SRT.br: @911175313: RCV-DROP…
-
### Category
Other
### Hardware
Other
### Firmware Version
2.5.7.f77c87d
### Description
RP2040-LORA-HF device is ignoring request to set INA219 as main battery device.
Continuously reports as…
-
### Describe the bug.
With firmware 241018 signal generator is not on the correct freq above approx 900mhz. Set signal gen app to 1288, observe a signal on 1268. Use the dial to tune up. The displaye…