-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
I have successfully flashed the programme onto my esp32 as seen from the log below. However, at the end I am expecting to see csi data at the end of this as it says on your tutorial "this will flash t…
-
Try this bit of code in `cardReader.py`:
...
c = ['/dev/tty.usbserial']
for x in range(0, 255):
c.append('COM' + str(x))
for x in c:
try…
drf5n updated
6 years ago
-
Currently UsbSerial supports FT232, PL2303, CP210x, CH34x and CDC serial devices. If you know any Usb to Serial converter which is not supported please, list them here.
Felipe
-
I can connect this device on windows but it gives me this error when I connect to android
[UsbDevice: /dev/bus/usb/002/003, 1ac2-f DESKO USB DEVICE, DESKO GmbH 00000017]
Unhandled Exception: Pla…
-
Any firmware from here does not work on my dongle (seems like device is bricked). However I can alway rollback to https://github.com/xsp1989/zigbeeFirmware/blob/master/firmware/Zigbee3.0_Dongle-NoSign…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…
-
```
What steps will reproduce the problem?
1. Run boblightd -f
2. Use it a longer period of time
3. Client suddenly seems to loose connection to boblight (the ambilight effect
resets to the controlle…