-
Your default reg Stuff in Autoconf blocked Hostapd to come up ....
## LOG
```
/usr/local/bin/hostapd /etc/hostapd/config.conf
wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Frequency 518…
-
I have a Panda PAU0a AC600 USB WiFi adapter (mt7610u chipset) installed in a Intel NUC13 i5 that is running Arch Linux. I configured hostapd based on your guide.
```
# cat /etc/hostapd/hostapd.co…
-
```
What steps will reproduce the problem?
1. happens everytime
2.
3.
What is the expected output? What do you see instead?
downloads should complete, download reaches 100%, loses connection and star…
-
## Describe the solution you'd like
Currently there is a sensor that indicates the clients connected to all the Wireless SSIDs that the device has.
Is it possible that there is another sensor that…
-
rtl8821cu AP mode traces in phydm_ccx.c with ht_capab [HT40-][HT40+] enabled
This is happening with a 4 antenna bearing unbranded RTL8811 usb adapter I bought on aliexpress [[1](https://aliexpress.…
-
Hi, I had installed a rt8821cu module inside of my SurgeTab PH-101 in order to replace a failed 2.4GHz Realtek module, and it is soldered to only use USB with the antennas properly soldered too. Howev…
-
When using 802.11s it is possible to block specific neighbours using `iw`.
```
iw station set plink_action
```
Gluon may maintain a blacklist of neighbour MACs (maybe in uci wireless) for easy acc…
tcatm updated
4 years ago
-
```
What steps will reproduce the problem?
1. happens everytime
2.
3.
What is the expected output? What do you see instead?
downloads should complete, download reaches 100%, loses connection and star…
-
## Overview
This is an attempt to finalize a well-documented procedure for calibrating the magnetometer, detailing needs and insights discovered from testing at the UA MIL. It exists as a GitHub Is…
-
For adding my device I made the following patch:
diff -rupN rtl8812AU_short/os_dep/linux/usb_intf.c rtl8812AU_long/os_dep/linux/usb_intf.c
--- rtl8812AU_short/os_dep/linux/usb_intf.c 2013-05-17 05:33…